RAX120 Slow Speeds Wired

Question

My ISP service is 200 mbps DL . Currnelty with the RAX120 my speeds are around 90 DL. When I bypass the router and direct to the modem I am running 226 Mbps. This happens to the firmware 122 and up.

Any ideas what I settings I need to set. When I used the Qos the speeds drop to less than 20.

plemans · Answer

are you testing wired/wireless?Have you checked the cable? it seems like you're dropping from a gigabit connection to a 100mbps connection. You can check this by logging in and going to advanced-----show statistics.https://kb.netgear.com/24222/How-do-I-display-Internet-port-statistics-on-my-Nighthawk-routerIf its showing that port at 100m and not gigabit, then its time to check cables/modems/ports.&nbsp;&nbsp;

ehmabe · Answer

I am testing wired. When connected direct to my modem sb6190. My speeds are over 200 mbps

plemans · Answer

and what do the port statistics show?&nbsp;

ehmabe · Answer

Port Status TxPkts RxPkts Collisions Tx B/s Rx B/s Up Time5G Ethernet Link Down 0 0 0 0 0 00:00:00WAN 100M/Full 617938 1142419 0 67067 544031 00:08:24LAN 1 1000M/Full 899947 503200 0 431181 46258 00:45:35LAN 2 Link Down 00:00:00LAN 3 1000M/Full 00:45:35LAN 4 1000M/Full 00:45:352.4G WLAN b/g/n/ax 1147M 8629 5253 0 2485 305 00:26:115G WLAN a/n/ac/ax 4803M 280762 130203 0 96113 5208 00:26:06PortStatusTxPktsRxPktsCollisionsTx B/sRx B/sUp Time5G EthernetLink Down0000000:00:00WAN100M/Full617938114241906706754403100:08:24LAN 11000M/Full89994750320004311814625800:45:35LAN 2Link Down00:00:00LAN 31000M/Full00:45:35LAN 41000M/Full00:45:352.4G WLAN&nbsp;b/g/n/ax1147M862952530248530500:26:115G WLAN a/n/ac/ax4803M280762130203096113520800:26:06

ehmabe · Answer

Should the WAN status be at 100m

Forum Discussion

RAX120 Slow Speeds Wired

7 Replies