NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

Crawstup's avatar
Apr 01, 2020
Solved

C7000 Cable Modem Router > GS108Ev3 Managed Switch

New Mac Mini System Design.

Am considering using C7000, connected directly to Spectrum satellite coax cable then, via ethernet port 1, connect to a GS108Ev3 switch.

Will use addiitonal C7000 ethernet ports to connect VoIP and a remote Mac Mini used for VHS to DVD conversion.

 

Will use additional GS108Ev3 ports to connect (2 each) Mac Minis (2020 Models), an HP Color Laserjet Pro M283fdw, and an Epson 1600 Scanner.

 

ISP is Spectrum and our Plan calls for 100Mbps downloads and 20 uploads. Am designing this system with the possibility of upgrading agressively to a much higher speed plan...maybe 300Mbps.

 

Wireless connectivity is, sometimes, cantankerous. Am employing ethernet hardwiring to those components that are most used and demand dependability.

 

However, if this design is too hopeful OR you see limitations to network ethernet speeds OR, in your opinion, a change in Netgear models and features best serves my design needs, by ALL means, don't hesitate to reply with your input.

 

 

  • That should work. 

    The only thing I'd consider would be if you plan on upgrading to gigabit at any point.

    The C7000 is rated to up to 400mbps on spectrum. The only device rated to gigabit is the CAX80 (not released yet)

     

    I will say that I'm not a huge fan of modem/router combo devices. Reason why is the ISP controls the firmware and upgrades to the firmware. Which they rarely do. 

    Plus if either the modem or router side goes bad, you're out the whole device. 

9 Replies