NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
BullheadBart
Jan 04, 2020Aspirant
Can't get logged in using correct user and password
After about 8 hours of trying, I cannot get connected to my router, My issue is I cannot access my router via the assigned ip address (192.168.0.1) or routerlogin.net. This seemed to may possibly ha...
DarrenM
Jan 17, 2020Sr. NETGEAR Moderator
The Ip address may have changed on the router you may need to find your default gateway to access the router.
https://www.lifewire.com/how-to-find-your-default-gateway-ip-address-2626072
DarrenM
- BullheadBartJan 19, 2020Aspirant
Darren,
Sorry for the delayed response. I've been out of town. I did exactly what you suggested and confirmed my IPS has not changed for my modem/router. It is still the published 192.168.0.1.
I'm still getting the exact same error message.
Thank you,
Bart
- FURRYe38Jan 19, 2020Guru - Experienced User
Try a factory reset on the modem and connect a wired PC to the modem. Use a different browser, IE11, Firefox or Opera and see if you can connect to the default modems web page. Look at your networking status on your PC and look at the "Gateway" IP address to confirm the modems IP address and use that to connect to using the browser.
- BullheadBartJan 19, 2020Aspirant
Thank you... Actually, I do seem to be connecting with the router via Genie - (seeing network map, etc). I just can't get into Router Setting to make any changes. I have used both Chrome and Firefox.
So I think I'm to the point I need to do a factory reset. I guess my question is will I have to reconnect all 21 wireless connected devices. This is a challenge (some much easier than others). It may be my only option. Or - maybe it's time to buy a new Modem/Router.
Thank you...