Forum Discussion

Initiate

Jul 24, 2022

CAX80 bricked power light on/ no response to ping

Same thing as everyone else. Nothing works! The modem router powers on and that’s about it. Can’t do a rest, hard reset or connect via tftp mode because it won’t even go into that mode. When CAX80 is ...

FURRYe38

Guru - Experienced User

Jul 25, 2022

What are the front LEDs showing?

So you can't access 192.168.1.1 or 192.168.100.1 after you press the reset button for 10 seconds then release?

https://community.netgear.com/t5/Cable-Modems-Routers/NOTICE-Users-with-sudden-non-functioning-CAX80-modems/td-p/2234550/jump-to/first-unread-message

SD92113
Initiate
Jul 26, 2022
Front led that is lit up is the power one. Bright white no flash. And no I can’t access the default IP address of the CAX80.

Trust me I have read a lot of the post on here about the CAX80 situation that I am experiencing and obviously NG does not care to share on how to fix this hardware issue. This is not a user issue, this is a device issue.
- FURRYe38
  Guru - Experienced User
  Jul 26, 2022
  You'll need to contact the forum moderators listed in that link I posted and ask for additional help and information regarding this. This is beyond forum help.
  
  DarrenM olympos1625