NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

RossS's avatar
RossS
Aspirant
Sep 10, 2020
Solved

CM1150v notice 6 message

I keep getting this  notice: CM-STATUS message sent. Event Type Code: 16; Chan ID: 29; DSID: N/A; MAC Addr: N/A; OFDM/OFDMA Profile ID: 3.;CM-MAC=28:80:88:d4:29:28;CMTS-MAC=00:01:5c:ad:ea:57;CM-QOS=...
  • RossS's avatar
    RossS
    Sep 12, 2020

    Maintance person for xfinity came and checked outside feed to my neighbor hood (my part) and found problem. Now all dBmV values are in spec. Thank you for the help.

plemans's avatar
plemans
Guru - Experienced User
Sep 10, 2020

Log into the modem and get a screen shot of the cable connections page and the complete lots. Not just 1. they're used together. 

RossS's avatar
RossS
Aspirant
Sep 10, 2020
  • RossS's avatar
    RossS
    Aspirant
    Sep 10, 2020
    • RossS's avatar
      RossS
      Aspirant
      Sep 10, 2020
    • RossS's avatar
      RossS
      Aspirant
      Sep 10, 2020
      • plemans's avatar
        plemans
        Guru - Experienced User
        Sep 10, 2020

        Your power levels are out of spec. You should be between -7.5dbmv ad 7.5dbmv. You should also only see about a 3.5dbmv difference betweenthe channels. You're running from -14.9 to -8.6. 

        If you have any splitters, amplifiers, attenuators in the coax line, remove them. If this doesn't help, you'd need your isp to check the line.