NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

jrhockin's avatar
jrhockin
Aspirant
Jul 01, 2018

CM600 upload light turns amber

Model CM600 Just did a factory reset. Maybe that will solve the prolem that the UPLOAD LIGHT turns amber after a while. Also, before I did the reset, the modem would just not work and lights flash....
Troubleshooting
vkdelta's avatar
vkdelta
NETGEAR Employee Retired
Jul 01, 2018

you signal coming in has issues. Please post your power table and DOCSIS event logs from the GUI.

 

Amber on US means it is not bonded.

  • jrhockin's avatar
    jrhockin
    Aspirant
    Jul 03, 2018

    Cable Connection
     
     
    Frequency start Value
    This field below allows you to modify the frequency the cable modem start with its scan during initialization and registration. Enter the new start frequency and restart the cable modem for it to take effect.
    Starting Frequency
     
    Startup Procedure
    Procedure Status Comment
    Acquire Downstream Channel 573000000 Hz Locked
    Connectivity State OK Operational
    Boot State OK Operational
    Security Enable BPI+
    IP Provisioning Mode Honor MDD IPv6 only
     
    <tabindex=-1>Downstream Bonded Channels
    Channel Lock Status Modulation Channel ID Frequency Power SNR Correctables Uncorrectables
    1 Locked QAM256 17 573000000 Hz -6.4 dBmV 39.8 dB 0 0
    2 Locked QAM256 16 567000000 Hz -6.1 dBmV 39.9 dB 0 0
    3 Locked QAM256 18 579000000 Hz -6.5 dBmV 39.7 dB 0 0
    4 Locked QAM256 19 585000000 Hz -6.6 dBmV 39.7 dB 0 0
    5 Locked QAM256 20 591000000 Hz -7.3 dBmV 39.4 dB 0 0
    6 Locked QAM256 21 597000000 Hz -6.7 dBmV 39.7 dB 0 0
    7 Locked QAM256 22 603000000 Hz -6.5 dBmV 39.7 dB 0 0
    8 Locked QAM256 23 609000000 Hz -7.3 dBmV 39.4 dB 0 0
    9 Locked QAM256 24 615000000 Hz -6.9 dBmV 39.4 dB 0 0
    10 Locked QAM256 25 621000000 Hz -7.1 dBmV 39.2 dB 0 0
    11 Locked QAM256 26 627000000 Hz -7.2 dBmV 39.1 dB 0 0
    12 Locked QAM256 27 633000000 Hz -7.4 dBmV 39.0 dB 0 0
    13 Locked QAM256 28 639000000 Hz -7.5 dBmV 38.9 dB 0 0
    14 Locked QAM256 29 645000000 Hz -7.8 dBmV 38.9 dB 0 0
    15 Locked QAM256 30 651000000 Hz -7.5 dBmV 38.8 dB 0 0
    16 Locked QAM256 31 657000000 Hz -7.1 dBmV 39.0 dB 0 0
    17 Not Locked Unknown 0 0 Hz 0.0 dBmV 0.0 dB 0 0
    18 Not Locked Unknown 0 0 Hz 0.0 dBmV 0.0 dB 0 0
    19 Not Locked Unknown 0 0 Hz 0.0 dBmV 0.0 dB 0 0
    20 Not Locked Unknown 0 0 Hz 0.0 dBmV 0.0 dB 0 0
    21 Not Locked Unknown 0 0 Hz 0.0 dBmV 0.0 dB 0 0
    22 Not Locked Unknown 0 0 Hz 0.0 dBmV 0.0 dB 0 0
    23 Not Locked Unknown 0 0 Hz 0.0 dBmV 0.0 dB 0 0
    24 Not Locked Unknown 0 0 Hz 0.0 dBmV 0.0 dB 0 0
     
    <tabindex=-1>Upstream Bonded Channels
    Channel Lock Status US Channel Type Channel ID Symbol Rate Frequency Power
    1 Locked ATDMA 4 5120 Ksym/sec 18600000 Hz 54.0 dBmV
    2 Not Locked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
    3 Not Locked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
    4 Not Locked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
    5 Not Locked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
    6 Not Locked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
    7 Not Locked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
    8 Not Locked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
     
    Current System Time: Tue Jul 03 06:22:33 2018
     
    Help CenterShow/Hide Help Center
    • vkdelta's avatar
      vkdelta
      NETGEAR Employee Retired
      Jul 03, 2018

      thanks. if you see your US power, it is too high (it is supposed to be bonded 3 or 4 US channels, but you have only 1).

       

      Either you need to remove splitters in your house or ask ISP to decrease attenuation to give you extra few dBs margin.