NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
I cant log into my CM1150v modem
Hi, I have had the CM1150v for a long time and at the beginning i noticed little to no problems with the modem. With Xfinity I have a plan that is supposed to get up to 800mbps down. At the beginin...
So factory reset the CM modem and connect 1 wired PC to WAN port #1, with the coax cable disconnected from the back of the modem. Can you log in to the modems web page at 192.168.100.1 then with a web browser? Should be able too...
If you can, then connect the coax cable to the modem.
Theres not adjustments in the modem to change for bandwdith. Is all automatic.
Be sure to disable LAG on the modem if you get in.
Please post a copy and paste of the modems connection status page.
Have the ISP check the signal and line quality UP to the modem. Be sure the ISP provisions the modem correctly.
Be sure there are no coax cable line splitters in the between the modem and ISP service box.
Be sure your using good quality RG6 coax cable up to the modem.
Be sure to power OFF the modem for 1 minute them back ON.
https://community.netgear.com/t5/Cable-Modems-Routers/General-info-and-Troubleshooting-for-Cable-Modems/m-p/1530376#M12853