NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Netgear Cm1000 Ofdm issues
Okay so im on spectrum's gig plan and it has been a nightmare of a time..... the issue i am having is i keep loosing the lock on the docsis 3.1 ofdm profile and noone can answe...
There was a cm status event type 5 loosing lock on ch11-17 only happened once... still after installing -10db forward path attenuator at the drop to reduce the hot signal some how the power levels are fluctuating from .9-1.5dbmv to 3-4dbmv on downstream... as far as upstream power levels i only see .3 fluctuations and all stay within the 2db of each other
also forwardpath attenuator affects 120-870Mhz so it has little to no effect on upstream.
This is the fluctuation in the downstream power signal I am talking about... so if I have a -10db forward path attenuator to reduce a hot signal what causing downstream power to further increase? Temp of the area has been high 60s and at night mid 40s will 20 degrees cause that much of a fluctuation?