NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
R700V2 drops internet connection right after restart.
This router was working from rom last 6 months. Suddelnly one morning 3 days ago it dropped inter connection. All devices shows strong WiFi signal but no internet. I restarted the router and it worke...
Thanks for your reply!
There is no Co-ax cable. It is connected to a AT&T Uverse Modem via Ethernet cable. I tried my old router and it worked without any issues.
Please post about this here for your model router:
https://community.netgear.com/t5/Nighthawk-WiFi-Routers/bd-p/home-wifi-routers-nighthawk
Modem Combo Units:
Couple of options,
1. Configure the modem for transparent bridge mode. Then use the NG router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the NG router gets from the modem.
Good Luck.