NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

JamesWino's avatar
JamesWino
Aspirant
Sep 12, 2018
Solved

UniFi USG with CM1000

I have a CM1000 and the WAN is connected to a SRX3205 VPN gateway.  I have no issues and when I connected these, everything worked immediately.  The only problem is the WAN to LAN performance on the ...
Troubleshooting
  • vkdelta's avatar
    vkdelta
    Sep 13, 2018

    CM1000 is a BRIDGE modem. It has passes on DHCP transactions from ISP directly to device on the LAN side. no config is needed.

     

    192.168.100.1 is the DAIGNOSTIC IP for checking GUI and logs.

     

    you should set the USGUniFI to DHCP and it should automatically get DHCPv4 and DHCPv6 from ISP directly.

vkdelta's avatar
vkdelta
NETGEAR Employee Retired
Sep 13, 2018

CM1000 is a BRIDGE modem. It has passes on DHCP transactions from ISP directly to device on the LAN side. no config is needed.

 

192.168.100.1 is the DAIGNOSTIC IP for checking GUI and logs.

 

you should set the USGUniFI to DHCP and it should automatically get DHCPv4 and DHCPv6 from ISP directly.

JamesWino's avatar
JamesWino
Aspirant
Sep 13, 2018

Thanks VKDelta!  You nailed it and I had some bad info from the tech folks at UniFi but they do not understand the CM1000.

 

Best,

JW