NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Upstream/Downstream
Hello, Since I'd have to pay for support with Netgear CS I'm making this post. My upstream & downstream LEDs blink all the time and not just the normal flicker. I've power cycled many times and it ...
Power levels are good.
However I see lots of Errors in the Event logs. Any Criticals, Errors or Warnings seen in the event logs needs to be reviewed and resolved by the ISP. Indicates a signal issue on the ISP line up to the modem.
Have the ISP check the signal and line quality UP to the modem. Be sure the ISP provisions the modem correctly.
Be sure there are no coax cable line splitters in the between the modem and ISP service box.
Be sure your using good quality RG6 coax cable up to the modem.
Start with removing any amplifiers, signal attenuators, or splitters from the coax.
From there check the line for kinks, damage, moisture in the line.
Check the connectors for improperly made ends, foil touching the copper coax line, loose connections, bad/old/cheap connectors, or corroded connections. Replace them if you do.
Be sure to power OFF the modem for 1 minute then back ON.
https://community.netgear.com/t5/Cable-Modems-Routers/General-info-and-Troubleshooting-for-Cable-Modems/m-p/1530376#M12853
https://kb.netgear.com/24311/Power-level-guidelines-for-a-NETGEAR-cable-modem-router
https://www.duckware.com/tech/solving-intermittent-cable-modem-issues.html
https://highspeed.tips/docsis-events/https://www.reddit.com/r/NETGEAR/comments/1cxoha1/will_never_buy_a_netgear_product_again/
The up time was about 2 days 11 hours I believe when I took those screenshots.
Power levels are good.
However I see lots of Errors in the Event logs. Any Criticals, Errors or Warnings seen in the event logs needs to be reviewed and resolved by the ISP. Indicates a signal issue on the ISP line up to the modem.
Have the ISP check the signal and line quality UP to the modem. Be sure the ISP provisions the modem correctly.
Be sure there are no coax cable line splitters in the between the modem and ISP service box.
Be sure your using good quality RG6 coax cable up to the modem.
Start with removing any amplifiers, signal attenuators, or splitters from the coax.
From there check the line for kinks, damage, moisture in the line.
Check the connectors for improperly made ends, foil touching the copper coax line, loose connections, bad/old/cheap connectors, or corroded connections. Replace them if you do.
Be sure to power OFF the modem for 1 minute then back ON.
https://community.netgear.com/t5/Cable-Modems-Routers/General-info-and-Troubleshooting-for-Cable-Modems/m-p/1530376#M12853
https://kb.netgear.com/24311/Power-level-guidelines-for-a-NETGEAR-cable-modem-router
https://www.duckware.com/tech/solving-intermittent-cable-modem-issues.html
https://highspeed.tips/docsis-events/
https://www.reddit.com/r/NETGEAR/comments/1cxoha1/will_never_buy_a_netgear_product_again/
I have had my ISP run multiple tests on there end, including testing up to the modem.
They said the event logs did have a few warnings and criticals but they said it was normal lol.
Short of them actually coming out to my house and doing a physical check of my lines going into their box, I think I've exhausted my options.
As far as I can tell there isn't any splitters or damage to the coax.
I'll just keep going with it until it stops giving me internet and then I won't be getting a netgear after this one.
Thank you all for your help. We can close this thread.
Ya those are not normal. I guess maybe for your ISP. đ Someone should take a look at those. I bet if they got cleared and solved, wouldn't see the issues anymore.
Is the modem working ok though?
DiRTyHAiRRy wrote:I have had my ISP run multiple tests on there end, including testing up to the modem.
They said the event logs did have a few warnings and criticals but they said it was normal lol.
Short of them actually coming out to my house and doing a physical check of my lines going into their box, I think I've exhausted my options.
As far as I can tell there isn't any splitters or damage to the coax.
If you have access to the cable connection box, one thing you can do is make sure the coax connections are tight. In particular pay attention to the ground wire that is connected to the coax shield. If any of the coax connectors are corroded, the ISP should replace them.
- At this point idk who else to have look at them. My ISP seems indifferent and I've sent my logs to an IT buddy of mine and now this forum and not sire what else I can do.
Technically, I do have internet but I've noticed some high ping times when gaming but that could be the game server side. Who knows.
I'll just keep using it til it dies for real and get a different brand and maybe an extended warranty. Might ask the ISP to send a tech out. ISP phone support may not be as reliable and someone in person.
If the modem is working ok, run it. Could try it at a friends or family's place to see if the problem follows if you can try that at some point. Might be telling.
Yea maybe I'll try that.
Thanks for all the help.
đ
