NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Wireless speed is slow, especially at night, what's going on?!
Hi All - Total wifi/router NOOB here. Problem I've been having is that on my normal wifi (not the 5G*this setting works great) I'm getting speeds of less than 10 mbps and at night it can be less ...
Just thought I'd follow up on this for those that were curious. I had tested my speed directly through ethernet at the modem/router combo and was getting the full 100 mbps that I was paying for. Unfortunately, I was not getting this out of my 2.4 ghz connection wirelessly (it was going in and out somewhere between 1-40 mbps). I was advised by help desk to change the channel via router login to get off a channel that others were using. This temporarily helped, but still the problem persisted. I called back again and we did a reset of the equipment that seemed to again temporarily help (maybe 2 days). After both of these things were tried they noted that my unit was to blame and they would be sending me a replacement. Hope this helps for those in the future. Also was unsure of how to handle this since I did not buy the telephone service contract this is SUPER EXPENSIVE...despite me having a 1 year warranty on the equipment. I made the point with out could I convince them that I needed a replacement if they wouldn't at least test to see if it was working properly. Seemed to work.... At any rate.. new device being shipped to me now.
Hello TxAggie
It does sound like some type of interference are you testing the wifi speeds on one device or multiple?
DarrenM
Just thought I'd follow up on this for those that were curious. I had tested my speed directly through ethernet at the modem/router combo and was getting the full 100 mbps that I was paying for. Unfortunately, I was not getting this out of my 2.4 ghz connection wirelessly (it was going in and out somewhere between 1-40 mbps). I was advised by help desk to change the channel via router login to get off a channel that others were using. This temporarily helped, but still the problem persisted. I called back again and we did a reset of the equipment that seemed to again temporarily help (maybe 2 days). After both of these things were tried they noted that my unit was to blame and they would be sending me a replacement. Hope this helps for those in the future. Also was unsure of how to handle this since I did not buy the telephone service contract this is SUPER EXPENSIVE...despite me having a 1 year warranty on the equipment. I made the point with out could I convince them that I needed a replacement if they wouldn't at least test to see if it was working properly. Seemed to work.... At any rate.. new device being shipped to me now.
If you don't use WiFi analyzer such as inSSIDer or Acrylic, smart phone app. Use it and check your neighbor's wireless signals and pick the best channel for you. Did you try this?
I haven't checked that. But will in the future. Not sure if my above message was clear or not but they did find my unit to be faulty - so they will be sending me a new one at no charge since I was still within my 1 year free repalcement warranty less the cost of shipping.
Thanks for the advice.
