I wanted to expand my WIFI with this SSID by adding another AP WAC720 to an existing wireless network using WC7500. There is a way to do it via WC7500. Not sure how. I need help setting this up.

It was load balacing issue. It is resolved now

one ssid cross two accesspoints WAC720 using wc7500

netwrks
Master
Apr 13, 2017
If you are using a controller, that's where you will do the setup / management. The manual has all the information you need.
- azizrj
  Aspirant
  Apr 16, 2017
  I tried but I couldn't find the solution. I am new to this setup. Can you please more specific if you can? One SSID on both WAC720 and WC7500
  Thanks,
  - michaelkenward
    Guru - Experienced User
    Apr 17, 2017
    azizrj wrote:
    One SSID on both WAC720 and WC7500
    
    I am not sure that I follow the question. But sharing an SSID on several wifi networks may not be a good idea.
    
    If you use the same SSID for all the wifi sources in your home the wifi clients can get confused about which one to talk to. They may end up locked on to a source with a weaker signal than one nearby.
azizrj
Aspirant
Apr 17, 2017
One access point WAC720 wouldn't be enough to cover the whole area.
I wanted to add another access point in the back area using same SSID and I assigned it to the first AP using Network Controller.
azizrj
Aspirant
Apr 17, 2017
These two APs are on VLAN 10
- azizrj
  Aspirant
  Apr 30, 2017
  It was load balacing issue. It is resolved now