NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Adding a Nighthawk R7000 bridge to existing Nighthawk R8000
I'm just an old lady and not very good with this computer stuff, so please help. I live on 3 acres. I have a shop about 140' from my home with my existing Netgear Modem CM500 that is plugged into a N...
The bridge mode of the router is described on page 137 here: https://www.downloads.netgear.com/files/GDC/R7000/R7000_UM.pdf Given the distance, you'll need to bridge at 2.4 Ghz. 5 Ghz probably won't travel that far.
This is worth a try, but it might not improve your performance much. 140 feet is a long haul for WiFi.
icelady wrote:
When I go on the internet to routerlogin.net, it only shows my nighthawk R8000. I used an ether cord from the R7000 to my computer, but I still don't see the R7000.
Connect the ethernet between one of the LAN ports of the R7000 and the computer. Don't connect the internet port on the R7000 to anything. Then either disable WiFi on the computer temporarily, or just turn the WiFi on the R8000 off (temporarily) - using the WiFi on/off button on the top of the router.
If http://routerlogin.net still doesn't connect, then try http://192.168.1.1