NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Can't log into EX6210
I've seen several similar questions, but they are all closed to further discussion. I received an email that new firmware is available. I can't access it via the IP address, the web tool that I ...
KMacneal wrote:
plemans wrote:Once its setup, it should get an ip address from the router. If you log into the router and find its ip address, can you access it using that?
That doesn't work either. I've tried the IP address of the wifi router----You can't access the router either? Or if you're using the router's ip address, you'll access the router. which is the goal so you can find out what address the router assigned to the extender. , and both channels of the extender.-----there's only going to be 1 ip address for the extender. Not 1 for each channel. I've tried the default IP address again and that doesn't work either.-----If you setup the extender, it won't be using the default ip address. it'll use the one the router assigns to it. Which is why you need to log into the router and find it.
Yes, Sorry. I meant EX6120.
Error when typing in IP Adress of Extender
This site can’t be reached
XXX.XXX.X.XXX refused to connect.
I don't know what you mean by setup in extender mode.
WiFi was shut off when I connected to the LAN port of the PC.
I tried both Chrome and Microsoft Edge.
I performed a factory reset and I was able to access the extender. I got through the whole set up again (set up as an extender) and when I got to the confirmation step I was no longer to acess the extender through the IP address or the webtool. I tried both a hard wire connection and wireless connection.
Once its setup, it should get an ip address from the router. If you log into the router and find its ip address, can you access it using that?
plemans wrote:Once its setup, it should get an ip address from the router. If you log into the router and find its ip address, can you access it using that?
That doesn't work either. I've tried the IP address of the wifi router, and both channels of the extender. I've tried the default IP address again and that doesn't work either.
KMacneal wrote:
plemans wrote:Once its setup, it should get an ip address from the router. If you log into the router and find its ip address, can you access it using that?
That doesn't work either. I've tried the IP address of the wifi router----You can't access the router either? Or if you're using the router's ip address, you'll access the router. which is the goal so you can find out what address the router assigned to the extender. , and both channels of the extender.-----there's only going to be 1 ip address for the extender. Not 1 for each channel. I've tried the default IP address again and that doesn't work either.-----If you setup the extender, it won't be using the default ip address. it'll use the one the router assigns to it. Which is why you need to log into the router and find it.