NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

soloko2412's avatar
soloko2412
Aspirant
Jul 11, 2018

How to extend wifi using two routers?

Hi guys, I have a house and a granny flat at the back. I have the internet connected (Optus Cable), the speed is fabulous however the granny flat at the back can't seem to get signals from the mode...
Troubleshooting
DexterJB's avatar
DexterJB
NETGEAR Moderator
Jul 13, 2018

Hi soloko2412,

 

Welcome to the community!

 

Are all 3 devices being used simultaneously? If so, please provide a diagram of your network for us to provide a better recommendation.

 

Regards,

 

Dexter

Community Team

 

  • soloko2412's avatar
    soloko2412
    Aspirant
    Jul 13, 2018

    Hello Dexter,

     

    Thanks for your reply.

     

    I was using the D7000 when I used to have ADSL connection, I recently switched to Cable connection.

     

    Currently, the two modem/router that I have been using are:

     

    1 - Netgear Cable CM500V-1STAUS
    2 - SAGEMCOM F@ST 3864V3 AC

     

    I have attached a diagram for you. There's an enthernet port at the granny flat that I used to connect the ADSL modem (when we still had to use ADSL connection) from the main house to the granny flat.

     

    Thank you.

  • DexterJB's avatar
    DexterJB
    NETGEAR Moderator
    Jul 17, 2018

    Hi soloko2412,

     

    Is there an Ethernet cable running from the main house to the granny flat? If yes, then you can configure the D7000 as an access point as described on page 112 of the user manual on this link.

     

    Regards,

     

    Dexter

    Community Team