Hi my Nighthawk EX7700 looses its settings if my router drops like if I reboot it. I then have to reset the unit and set up again. Is this a known fault. Thank you. Colin. Uk

It's a known issue with earlier hardware - ran into it myself. Firmware rollback solved the problem for me, make sure to avoid the .210 as well because it has the same problem - https://community.netgear.com/t5/WiFi-Range-Extenders-Nighthawk/EX7700-keeps-factory-resetting-every-few-weeks-Loses-all/m-p/2213644

Hi Oliver thank you for your reply, unfortunately my device is over a year old so I have no warranty but find it father shocking that it is a known issue but you only fix if a user happens to discover the problem whilst it is still in warranty. This would be an interesting storyline for a newspaper! Can you please tell me what you charge to fix the issue or the cost if you sold me the part and I installed it myself? The serial number is 5HX1895X00239.Thank youColin Clement

Just to add this is my configuration I have read that this could be a problem with the firmware or the flash drive. Whichever it is the responsibility of Netgear and I expect some sort of answer asap.

Can someone please help me. I need to fix the flash issue on my EX7700.

Hi @Colinclement, Thank you for reaching out. We are sorry for not being able to get back to you immediately. May we know what is the current firmware of the extender? The issue only happens when the router is rebooted, correct? Also when you say the extender loses its settings, did you mean that the extender return to default settings? If yes, do you see the default wireless name of the extender( NETGEAR_EXT)? You may also try uploading a different firmware version to your extender to isolate if this is a firmware issue. https://kb.netgear.com/000061572/How-do-I-manually-update-the-firmware-on-my-NETGEAR-WiFi-Extender Please do not hesitate to let me know if you need further assistance. Regards, Oliver Community Team

Nighthawk EX7700 loosing settings

11 Replies

Colinclement
Tutor
Jan 11, 2023
Just to add this is my configuration I have read that this could be a problem with the firmware or the flash drive. Whichever it is the responsibility of Netgear and I expect some sort of answer asap.
Colinclement
Tutor
Jan 17, 2023
Can someone please help me. I need to fix the flash issue on my EX7700.
- olympos1625
  NETGEAR Employee Retired
  Jan 20, 2023
  Hi @Colinclement,
  
  Thank you for reaching out. We are sorry for not being able to get back to you immediately. May we know what is the current firmware of the extender? The issue only happens when the router is rebooted, correct? Also when you say the extender loses its settings, did you mean that the extender return to default settings? If yes, do you see the default wireless name of the extender( NETGEAR_EXT)? You may also try uploading a different firmware version to your extender to isolate if this is a firmware issue.
  
  https://kb.netgear.com/000061572/How-do-I-manually-update-the-firmware-on-my-NETGEAR-WiFi-Extender
  
  Please do not hesitate to let me know if you need further assistance.
  
  Regards,
  
  Oliver
  
  Community Team
  - Colinclement
    Tutor
    Jan 21, 2023
    Hi Oliver
    
    Thank you for reaching out to me. The firmware is 226 which is exactly the same as my other unit which is the same model that I use in another part of the house so it can’t be software ! You say try a different version but this is not something I can do from the app. That just updates to latest version. If I reboot with either the app, or power button the unit comes back on eventually with no lights on and does not show on the app. This is definitely a hardware issue but I know you are the expert. I appreciate your help and advice. Regards. Colin.

Forum Discussion

Nighthawk EX7700 loosing settings