WNDR3700 and D-Link DRP-1260 Print Sever

Question

After upgrading from a WGR614 router to the WNDR3700 my D-Link DPR-1260 USB PS does not connect via WIFI. I can use it with the network cable connected but it requires a reboot if not used for a few hours. I use the PS to connect to a Brother H1440 laser (USB only). Is there an incompatibility that I will have to live with or some other solution? I have rebooted everything and deleted and re-added the printer several times.

TIA
Phil

jmizoguchi · Answer

WNDR3700 is not WN3500rp.Forum has specific place for your router Belongs to http://forum1.netgear.com/forumdisplay.php?f=105repost correct location

fordem · Answer

You replaced the router - did you reconfigure the D-Link print server appropriately (ip address/SSID/encryption)?

pwil · Answer

jmizoguchi wrote:WNDR3700 is not WN3500rp.Forum has specific place for your router Belongs to http://forum1.netgear.com/forumdisplay.php?f=105repost correct locationThanks. I reposted there.

jmizoguchi · Answer

ThanksActive and correct thread http://forum1.netgear.com/showthread.php?t=86367

ma447 · Answer

Hey Guys, I have a D-Link 2730 Router and was thinking of purchasing the Netgear WN3000RP. Since they are different manufacturers, will they connect?

Forum Discussion

WNDR3700 and D-Link DRP-1260 Print Sever

6 Replies