Adding a GS108 switch to Nighthawk R7800

Each room is wired for cable and two cat6 ports. All that wiring feeds into the panel. I also have my direct tv and Clare home solutions coming into the panel. Inside the panel I have my Arris modem and nighthawk router. I have my wireless network working correctly. I purchased 1ft cat6 lines To hardwire a couple devices into the router. My kids computer is plugged into the port in his room and a 1 ft cat6 from its designated spot in the panel to the router. Same with the living room TV. My goal is to add all the rooms to the available ports in the gs108. I plugged the switch into port one of the router and port one of the switch and proceeded to add the remaining cat6 lines from the ports in the panel to the switch. The lights on the switch that are active are green. The lights on the router corresponding to the ports are white. The light corresponding to the wireless signal is Amber. I have also tried plugging the switch into port one of the router and port 8 of the switch. Ports in rooms not receiving signal and no wireless signal. Unplug switch and put all connections back the way they were originally and restart modem and router and all signals return to room ports and wireless.