A few days ago I tried updating to R6350_V1.1.0.78_1.0.1 with the nighthawk app. (Yes, I found out that updating through the app is not a good idea) Now the router boots up and the power and usb lights alternate with no internet.I have tried to do a hard factory reset already with no success.Next, I went through the steps to attempt tftp (https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP) but I haven't got it to work yet. ------------------When I ping the router I get something like this: C:\Users\Family>ping 192.168.1.1Pinging 192.168.1.1 with 32 bytes of dataReply from 192.168.1.10: Destination host unreachable.Reply from 192.168.1.10: Destination host unreachable.Request timed out.Reply from 192.168.1.10: Destination host unreachable. Then when i try tftp i just get: C:\Users\Family\Desktop>tftp -i 192.168.1.1 put R6350_V1.1.0.78_1.0.1.imgConnect request failed------------------Should I keep trying tftp or is it toast? I have also seen an article talking about opening the router to fix it. I am willing to try this if it is the only option left.

TFTP is sensitive to timing. try it a few times. Also, try watching an instructional video. it can help. If it doesnt work, you can try nmrpflash. are you on windows? if so, follow this guidehttps://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP just make sure you enable tftp https://www.thewindowsclub.com/enable-tftp-windows-10 and here's a video walk through. https://www.youtube.com/watch?v=R9DLrLQrpaw and if that doesn't work, you can try using nmrpflashhttps://github.com/jclehner/nmrpflash

Bluewolf21

Initiate

Dec 24, 2020

Solved

R6350 bricked after update

A few days ago I tried updating to R6350_V1.1.0.78_1.0.1 with the nighthawk app. (Yes, I found out that updating through the app is not a good idea) Now the router boots up and the power and usb lights alternate with no internet.

I have tried to do a hard factory reset already with no success.

Next, I went through the steps to attempt tftp (https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP) but I haven't got it to work yet.

------------------

When I ping the router I get something like this:

C:\Users\Family>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data
Reply from 192.168.1.10: Destination host unreachable.
Reply from 192.168.1.10: Destination host unreachable.
Request timed out.
Reply from 192.168.1.10: Destination host unreachable.

Then when i try tftp i just get:

C:\Users\Family\Desktop>tftp -i 192.168.1.1 put R6350_V1.1.0.78_1.0.1.img
Connect request failed

------------------

Should I keep trying tftp or is it toast?

I have also seen an article talking about opening the router to fix it. I am willing to try this if it is the only option left.

plemans
Dec 24, 2020
TFTP is sensitive to timing. try it a few times. Also, try watching an instructional video. it can help.
If it doesnt work, you can try nmrpflash.
are you on windows? if so, follow this guide
https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP

just make sure you enable tftp
https://www.thewindowsclub.com/enable-tftp-windows-10

and here's a video walk through.
https://www.youtube.com/watch?v=R9DLrLQrpaw

and if that doesn't work, you can try using nmrpflash
https://github.com/jclehner/nmrpflash

Forum Discussion

R6350 bricked after update

3 Replies