NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
R7000 Not allowing full speed
Need some help getting router to allow full ISP speed. Here’s where I’m at: Upgraded ISP speed to 300Mbps, but have always had consistent 96-98Mbps speed, even after upgrade. Had service provider her...
>[…] Read. Look for the
LED descriptions and "Troubleshoot". Then look at the LAN Ethernet
port-status LEDs on the router? […]
Apologies for leaving out that detail. I did read the manuals and troubleshooting as much as I could before posting, which is why I’m now posting because I’m stuck
>[…] What makes you think that the router is your bottleneck? […]
Because I mentioned modem speeds are fine, but output after router seems to be the issue. Unless it’s cables, which I also mentioned I swapped out for new ones.
>[…] That suggests that the link between the modem and the router is running at gigabit/s speed […]
Exactly, so this is also the reason for thinking the issue above.
>[…] I know nothing about your (unspecified) "Apple TV" […]
Agree and nothing to worry about here. I just posted that detail for context as to what was plugged into the router, since details are sometimes helpful.
>[…] https://community.netgear.com/t5/x/x/m-p/2069376#M186506 […]
Not sure why the link. Are you advising to try the latest firmware?
LED descriptions and "Troubleshoot". Then look at the LAN Ethernet
port-status LEDs on the router? […]
Apologies for leaving out that detail. I did read the manuals and troubleshooting as much as I could before posting, which is why I’m now posting because I’m stuck
>[…] What makes you think that the router is your bottleneck? […]
Because I mentioned modem speeds are fine, but output after router seems to be the issue. Unless it’s cables, which I also mentioned I swapped out for new ones.
>[…] That suggests that the link between the modem and the router is running at gigabit/s speed […]
Exactly, so this is also the reason for thinking the issue above.
>[…] I know nothing about your (unspecified) "Apple TV" […]
Agree and nothing to worry about here. I just posted that detail for context as to what was plugged into the router, since details are sometimes helpful.
>[…] https://community.netgear.com/t5/x/x/m-p/2069376#M186506 […]
Not sure why the link. Are you advising to try the latest firmware?
> Apologies for leaving out that detail. [...]
This reveals what, exactly, about what the LEDs are doing?
> [...] but output after router seems to be the issue. Unless it's
> cables, which I also mentioned I swapped out for new ones.
"cables" to _what_? The best cable on the planet won't make a slow
device faster.
> Agree and nothing to worry about here. [...]
Then about what, exactly, are you complaining? "speed" to _what_?
> [...] Are you advising to try the latest firmware?
You seem to be trying different versions, none of which is the
latest. Any reason?