NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Ready NAS 102 Seems to have lost a SATA port
Good day folks, kind of an urgent situation. We noticed a couple days ago that the system was degraded and the Channel 2 drive was or failed. So I bought a new pair of drives with the intention of ju...
Hello MikeRuth
And welcome to the NETGEAR Community! 🙂
Could you please exchange the non working disks to the working bay and check to confirm whether the disk or main unit have the issue.
Have a lovely day,
Nivedita Pa
Netgear Team
- I will try that after I have transferred all of the data to a new NAS. That task should be completed over the weekend. I will advise as soon as I can. Thank you
Ok well, I removed drive 1 from bay 1 and installed it into bay 2 then took the original drive from bay 2 and put that into bay 1 and all is working as it should now. So I have no idea at this point why bay 2 stopped seeing my drive.
After the swap I took drive 2 out, cleaned it with DISKPART and reinstalled it back into bay two. The system rebuilt the array of about 2 terabytes in 12 hours.
So no solution at this time and I would consider this issue closed unless I have any further trouble.
thank you,. .
NETGEAR Academy
Migliora le tue competenze con la Netgear Academy - Formati, certificati e rimani aggiornato con la tecnologia Netgear piĂą recente!
Unisciti a noi!
ProSupport for Business
Piani di supporto completi per l'ottimizzazione della tua rete e la tranquillitĂ della tua azienda.