NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
626
Removed two disks from an older system and installed in the ReadyNAS system. INstalled into existing system and get an error message. What do I do to get the system to recognize these driv...
Digital999 wrote:
Yes, we want tow different volumes of different sizes. Lots of history there but that is what we want.
Have you switched to flexraid? If you haven't, then that is the first step. If you see a green stripe on the XRAID control, then click on it. (the green stripe signifies XRAID is on).
Then you'd select the two disks and create a new volume on them.
Not sure what is going on with disk 4. It kind of looks like you'd already created a volume, but and not just formatted the drives??? If that is the case, you'd need to click on the volume settings wheel for bank-3 and bank-4, and delete those volumes (before you can create a new RAID-1 volume).
Thanks again for you guidance. As suggested, I deleted the JBOD volume, had two drives shown, selected both and made a Raid 1 volume.
It is grinding away as it attempts to sync the raid disks. There is no useful data there but after 18 hours it will complete and we can go forward.
I then reproduced the issue on another system and was able to document the process.
Digital999 wrote:
There is no useful data there but after 18 hours it will complete and we can go forward.
RAID operates at the block level. Sync always takes the same amount of time - even if the volume is empty.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
