Help with Twonky versions

Well I set TWONKY=1 into /etc/default/services and rebooted and finally it shows as enabled and therefore starts.

Odd that running.sh does not cause the green icon to show although it does exit with status 1.

Any help on versions would be appreciated.

Yes the TWONKY=1 tells the NAS to start the service on boot. Not sure why that line was missing.

Not sure what's needed to update. It could be as simple as installing the new add-on over the top of the old one.

last version is 7.2.8
http://www.twonkyforum.com/downloads/7.2.8/

will check if I can upgrade my version

because you are lucky guys 7.2.8 is in my dropbox in community section under x86 4.2 directory

super-poussin wrote:
because you are lucky guys 7.2.8 is in my dropbox in community section under x86 4.2 directory

I installed it but it won't start. Running it manually I get

surire:/usr/local/TwonkyVision# /usr/local/TwonkyVision/twonkyserver -- -appdata "/c/twonkymedia"
Twonky Version 7.2.8

For image conversion and scaling the TwonkyServer utilizes ImageMagick. For details on the license please see /usr/local/TwonkyVision/cgi-bin/convert-readme.txt
No personal TLS certificate found in /c/twonkymedia/tls.pem! Will use built-in keys (this is insecure)! You have been warned ...
libgcc_s.so.1 must be installed for pthread_cancel to work
Aborted


Checking the libs, I noticed that ldd on 7.0.11 shows

twonkyserver:
        linux-gate.so.1 =>  (0xffffe000)
        libpthread.so.0 => /lib/libpthread.so.0 (0xf76fb000)
        libc.so.6 => /lib/libc.so.6 (0xf75bd000)
        /lib/ld-linux.so.2 (0xf771a000)

but on 7.2.8 it shows

twonkyserver:
        linux-vdso.so.1 =>  (0x00007fffb091f000)
        libpthread.so.0 => /lib64/libpthread.so.0 (0x00007effd0f7d000)
        libc.so.6 => /lib64/libc.so.6 (0x00007effd0c0c000)
        /lib64/ld-linux-x86-64.so.2 (0x00007effd1199000)

I don't appear to have a libgcc_s.so.1 in /lib64, although there is on in /lib. I tried a symlink, but no luck.

Any ideas?

Cheers
Antony