NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
iscsi disk is connected on iSCSI initiator properties but not visible on Windows disk management
On my Readynas Pro 4 (OS 6.10.4) I have setting a iSCSI disk. I have setting the initiator (a windows server 2016).
The initiator have the target connect but in windows disk management there is not the volume.
I have another iSCSI disk (from Qnap nas) connect to this initiator and this work well...
How can I do to solve this? Thanks
bob
Hi Bob245
When you create a LUN it is first "Unassigned". You need to make a target LUN group and assign your LUN to that group. The fact that you can map the LUN target but there is no volume showing up in Windows, would suggest the LUN you have is not assigned to the LUN target group.
Cheers
3 Replies
Replies have been turned off for this discussion
Hi Bob245
When you create a LUN it is first "Unassigned". You need to make a target LUN group and assign your LUN to that group. The fact that you can map the LUN target but there is no volume showing up in Windows, would suggest the LUN you have is not assigned to the LUN target group.
Cheers
You were right, I hadn't put LUN in the Target LUN Group.
Thanks a lot
bobNo problem and good to hear that you got it solved. Please do consider to mark this post as "Resolved".
Cheers.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
