NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Need SMB Plus app
Hi, I need SMB Plus for my ReadyNas 102 with firmware 6.10.10. As Applications is no longer available through the web administration page, can some body watch me how to get it and how to install it...
The 102 natively supports SMB 2 & 3, you do not need SMB Plus to enable it. You do need it if you need to disable SMB 1 or 2.
So start with what your actual problem is, not what you believe the solution to be,
Hi,
I tried with powershell this command
Get-SmbConnection -ServerName mynas
I received 1.5.
I tried with powershell this command
Get-SmbConnection -ServerName mynas
I received 1.5.That tells you what was negotiated, not what was supported by the NAS. At this point you don't know why that was the result.
FWIW, it reports 3.1.1 on my PC.
Try installing nmap from
Then go to the installed directory (c:\Program Files (x86)\nmap on my PC), and run
./nmap.exe -p 445 --script smb-protocols mynasThat command will return all the SMB verions supported by myNAS
When I run it, I see this:
Host script results: | smb-protocols: | dialects: | NT LM 0.12 (SMBv1) [dangerous, but default] | 2.0.2 | 2.1 | 3.0 | 3.0.2 |_ 3.1.1I wonder if there is any risk in using "install firmware"
No issues for this. The control just uploads the deb file to the NAS and installs it. It has no idea that the deb file isn't actually firmware.
If you are worried, just downgrade to 6.10.9 temporarily, and manually install it from the apps page.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
