Logitech Media Server by Super-Poisson not compatible with 6.6.0

:smileytongue:

Lot's of questions asked... I'll just use bullet points to make it easier to read

- Did clean everything related to LMS (Nightly & NAStools) from NAS during the 6.6.0 incident via SSL as discussed earlier in this thread. Took backups first for favourites and other settings.

- Before 6.6.0 i did not clean up but installed new nightly on previous, same now with 6.6.0 forward, have not noticed any problems (yet) with straight forward updating

- My RN102 LMS works on both arm.deb- & all.deb-packages, don't know what system your LMS is running on so please check somewhere what operating system. Not much difference in features between 7.9.0 and nightly 7.9.1

- I have the bridge plug-ins installed for both chromecast and UPnP/DLNA. I can use chromecast, TV and Amp as LMS players but they don't support reliably 192/24 and DTS FLAC's so I never use them. I have 2* Touch for playback, one with the 192 option and other also with analog output for wireless headphones. I have a 4 Zone setup but as the Amp plays e.g. net radio (Radio Paradise is my favourite station) I'm fine with 2 squeezebox players.

and what more to say....

Oh yes, a hint for anyone struggeling with LMS playback..

- Use a PC/laptop (a spare if possible) with HDMI-output, connect it to your amp (HDMI), install SqueezePlay on the PC, setup so you can control the PC SqueezePlay player via other PC/Mobile/Tablet Squeezebox control app and you have a LMS setup which plays 192/24, DSD 176/24, 6 channel PCM 96/24 and everything else you have on your LMS. DTS & DD playback might be tricky unless your LMS is running on the PC in question.. If you only hear static noise with DTS you've got a problem :-  And you don't even have to touch the PC so it can be out of sight unless you want to see what's playing on the laptop screen. Or if your Amp is connected to a TV/Monitor you see the large SqueezePlay now playing info if needed.

- This setup only needs 2 audio playback setup changes on PC if you have multichannel PCM files. Change speaker setup on PC to 5.1 and allow 192/24 playback to get the most out of the system.

Br

Ken