USB to UART Bridge VCP Drivers for CP210x

Hi all,

After a few hours of search, here is my share for installing cp210x for ReadyNas 104 with os 6.1.8 => Arm architecture.

All the steps of iamthemitch http://www.readynas.com/forum/viewtopic.php?f=35&t=68537&p=433189#p418890 worked but (as I am a newbie) I did not apply the arm difference ride away .

So, follow those steps and change ARCH=x86_64 by ARCH=arm !

I heve been blocked when doing the

make ARCH=arm

by having

make: arm-mv7-linux-gnueabi-gcc: Command not found
  CHK     include/linux/version.h
  CHK     include/generated/utsrelease.h
make[1]: `include/generated/mach-types.h' is up to date.
  CC      kernel/bounds.s
/bin/sh: 1: arm-mv7-linux-gnueabi-gcc: not found
make[1]: *** [kernel/bounds.s] Error 127
make: *** [prepare0] Error 2

So int the .conf file I commented the line

CONFIG_CROSS_COMPILE="arm-mv7-linux-gnueabi-

FYI no need to build the cp210x drivers before.

If you want to use "Homeseer" software, don't select the "Aeon Labs Aeotec Z-Stick" in the dropdown list of the "Controller management" area but the "Generic Serial Controller" instead.

Best regards.