NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Corrupted EEPROM on ReadyNAS 2100
I was attempting to upgrade a RedayNAS 2100 from RAIDar 4.2.31 to 6 and I discovered that I actually have the v1 hardware that doesn't support 6. (V1 aparently uses a full size DIMM memory stick) ...
The VPD file is unique to your NAS (it includes the serial number) and is encrypted. Only Netgear can create them.
You did use an OS4.2.x style USB recovery, correct? And did the process seem to go right (unit turned off at completion)? If not, then try another USB drive. The legacy machines can be quite finicky about the drive you use. OS6 conversion preserves the VPD, so I'm not sure why the upgrade process, though it would fail to boot on that hardware, would cause the VPD to be deleted or corrupted.
Yes I used a 2GB thumb drive that I keep around for firmware updates because I've had good luck with it working on everything I've plugged it in to like test equipment
Held down backup for 15 seconds while pressing power on and unit seemed to boot and shut it's self off after about 3-4 minutes.
Held down backup for 15 seconds while pressing power on and unit seemed to boot and shut it's self off after about 3-4 minutes.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
