NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Debugging erroneous UPS alerts
We just moved out RN516 from our main computer room to another building and its now on its own UPS (Tripp-Lite Omni1500LCDT). The UPS is connected via USB and when viewing the UPS status in the Ready...
I am only a Newbie to ReadyNAS, but have already raised a post about the lack of UPS information flowing to the NAS.http://www.readynas.com/forum/viewtopic.php?f=24&t=79444
I believe that a PC connected to the UPS will be able to obtain far more information including logs.
If the 'problem' is regular and you can sensibly do it, I suggest that you power a PC from it and then run for a few days.
If that gives no joy, somewhere in this forum I have seen a post on how to connect a PC as well as the ReadyNAS to the UPS.
If neither of these is possible, I have no other ideas.
I believe that a PC connected to the UPS will be able to obtain far more information including logs.
If the 'problem' is regular and you can sensibly do it, I suggest that you power a PC from it and then run for a few days.
If that gives no joy, somewhere in this forum I have seen a post on how to connect a PC as well as the ReadyNAS to the UPS.
If neither of these is possible, I have no other ideas.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
