Forum Discussion

Aspirant

Dec 30, 2021

Help upgrading ReadyNas Ultra 2 Plus memory

I have a ReadyNas Ultra 2 Plus that I am looking to do a few things on. Replace the external powersupply (it crapped out on me on the same day I upgraded the HDD's :smileymad: Upgrade from Raidar ...

EndersShadow

Aspirant

Jan 02, 2022

Thanks! I ended up going with a InstallerCCTV 12V 5 Amp UL Listed AC DC 60W 2.1mmx5.5mm powersupply and a stick of Crucial 2GB Single DDR3/DDR3L 1600 MT/S (PC3-12800) memory. I'm aware the memory will operate at the PC 8500 speed, but otherwise I think it should work without causing any issues, and let me upgrade it when I get it in in two weeks (after the unit is operational).

Sandshark

Sensei

Jan 02, 2022

I've used PC3-12800 memory in an Ultra/Pro 2 with no issue. It's actually a lot easier to find used than the slower stuff. Getting a supp[ly rated for CCTV was a good move. They tend to have better regulation, especially at inrush, than those just listed as for LED lighting.

EndersShadow
Aspirant
Jan 09, 2022
Should I upgrade the BIOS with the new hard drives in pace or without?

I’m basically starting from square one and have already dropped in the new memory, the PSU came today and the new hard drives have no data on them, so they will need to be setup….
- StephenB
  Guru - Experienced User
  Jan 10, 2022
  EndersShadow wrote:
  Should I upgrade the BIOS with the new hard drives in pace or without?
  
  With. Though you can do it with only one drive installed - avoiding the resync.
  - EndersShadow
    Aspirant
    Jan 10, 2022
    Thanks everyone, with your help I have:
    Upgraded the Memory from stock 1 gig DDR3 to 2GB DDR3/DDR3L PC3-12800
    Updated the BIOS/ moved to ReadyNAS OS6
    Added 2 4TB 5400 RPM CMR WD Red drives
    Purchased a new powersupply
    
    The device is up and running and I'm currently restoring settings and then will transfer the data from my HTPC back to the NAS