Need help on PSU for repair it

This pcb looks likes it has been toasted before..... The repaired tracks as a silent wittness. For the diode, i don't have a clue.
I am answering to this topic coz the numbering next to the sublimated resistor looks like they are referring to a failsafe resistor. The ones who are supposed to burn in case something goes wrong. Maybe you are lucky and the diode was the cause of this and I hope you find the right type.
Another tip from my side. My experience with switching power supplys.... capacitors, capacitors, capacitors. So if you get this thing running again i suggest to replace all secondary capacitors you can find and use high quality 105 degree types, coz they last a lot longer.
Another one... check for bad solderings. The photo shows some very questionable ones, the ones with a ring int the soldering, wich look a lot like cracks.

regards,
Erik

Thank you very much Erik!

The first PCB is not mine, I grabbed the photo from insidegadgets. On my PCB the resistors R6, R7 and diode D2 are burned, I desoldered them. From that photo I see that R6 is 10 ohm and R7 is 5.1 Kohm but .....the diode?? I see only one yellow band, I need one code, one number, something.

The second photo is mine, I desoldered it from the base PCB and I found another burned resistor, but I don't know which is the impedence :( ...I think 4.7 kohm (yellow-violet-red-gold), but I'm not shure ...I searched many many time on internet for a schema or similar, but whitout results :(

I've just desoldered ALL secondary capacitors :D and added them to my chart on a e-shop for the order, but I need to know the value of that diode and that resistor.

Can anyone help me?

Again.... Thank you very much!