NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Netgear RN102 - power light keep flashing after firmware update and Raidar status is TFTP_REQ
I have the RN102 ReadyNas. I tried upgrading the firmware from 6.10.5 to 6.10.7 and it failed. I use the USB Recovery mode to flash the firmware to 6.10.7 and Raider reported that Firmware is now 6.10.7 but the power light just keep blinking and I cannot access the drive. Raidar status shows: TFTP_REQ. I just want to get access the data. If I cannot fix the ReadyNAS, is there a way to access my data. I setup is just a simple RAID-0 and there is one folder that is password protected (you need the username/password to access the folder).
Please help!! All my important files are in the NAS and I do not have a backup for the files.
1 Reply
One option is to connect one of the drives to a Windows PC using a USB/SATA adapter or dock. Then use ReclaiMe to off-load the data.
Note you can see if ReclaiMe can find the data before you pay for the software.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
