NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
New-to-me ReadyData 5200 not responding to web gui or Raidar requests
Hello! I have recently aquired a ReadyDATA 5200 with a couple of EDA4000s and I'm having a bit of trouble accessing the device. I know nothing of it's history nor have I any experience with Netge...
The BIOS reset did it, FYI for anyone searching the web for a similiar issue. Although the USB drive was detected and selected, for some reason it wouldn't boot to the OS after a reboot, would only do so following an OS Reinstall or a Factory Reset. All the sensor data is present in the GUI, firmware is up to date, Raidar can find it, able to create volumes and all that good stuff.
Thanks janderson223!
No go, same behavior.
Decided to confirm that the USB DISK is selected as the boot device and then set BIOS to optimal defaults, rebooted, did take some time to begin loading the web page, but it came up normally again. Fingers crossed.
The BIOS reset did it, FYI for anyone searching the web for a similiar issue. Although the USB drive was detected and selected, for some reason it wouldn't boot to the OS after a reboot, would only do so following an OS Reinstall or a Factory Reset. All the sensor data is present in the GUI, firmware is up to date, Raidar can find it, able to create volumes and all that good stuff.
Thanks janderson223!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
