NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
PC not found NAS eSATA connect
Hi
I have Netgear nas RN102 (firmware6.4.1) // PC - Win 7/ Motherboard Asus Rampage formula - Intel X48 / latest bios Version 1001. https://www.asus.com/Motherboards/RAMPAGE_FORMULA/specifications/
When you connect the NAS to motherboard using a cable SATA / eSATA in the bios or in windows do not find NAS. :////
How do connect NAS and PC for transfer 1TB dat (photo) -- through the LAN it is extremely long :/
Thanks for the answer why not find NAS Connection via SATA :)
4 Replies
Replies have been turned off for this discussion
The NAS is not an eSATA/USB peripheral. The eSATA port is for connecting an external hard drive to the NAS.
The NIC (ethernet port) is used for connecting the NAS to your network.
Are both your NAS and PC connected to a gigabit router/switch?What services and apps are you running on your NAS?
THX for answer
Motherboard - Gigabit LAN
Tenda router N60 - Gigabit LAN
Cable - UTP cat.6 / 2m + 10m
in the NAS 2x 3TB WD red - WD30EFRX
I have instaled in NAS only 2 aplication - PLEX a Bit Torrent Sync // not running when copy data
copy with error
copy without error // 700GB = 700 000 MB / 700000/4,3/60/60 = +- 45hours....
Hi Eilonwy,
Either you access the NAS via File Explorer to copy and paste files or create a backup job through the built-in backup manager in the admin page.
Kind regards,
BrianL
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
