NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
justsumdad
Apr 23, 2025Aspirant
ReadyNAS RN104 fresh setup to replace Seagate NAS
hello, just a fresh user of the ReadyNAS system 🙂 I just acquired (used) a ReadyNAS 104 and stuck in four 4tb WD purple drives I had salvaged and tested good. Its taking days to sync,...
- Apr 23, 2025
justsumdad wrote:
any input on the two issues?
Sorry, I thought I'd posted that.
My RN102 has the same processor, and runs at 50C when idle. So your CPU temp is typical.
The NAS has a back up job capability that can copy directly from the Synology. Protocol include rsync (which is what I use), smb, and NFS.
justsumdad
Apr 23, 2025Aspirant
Its been running now 42 hrs and lists just under 50% done.
I did not think this is absurd prepping raid 5 on four 4tb 5400RPM drives...
do you?
Logs don't show any errors or warnings...
StephenB
Apr 23, 2025Guru - Experienced User
justsumdad wrote:
Its been running now 42 hrs and lists just under 50% done.
It's been a while since I've seen this posted for the RN104. But I think it should have completely finished by now. This is assuming you aren't loading data onto the NAS during the sync.
So I would look for errors in the log zip (which has a lot more information than the web ui)..
- SandsharkApr 23, 2025Sensei - Experienced User
Some WD Purple drives use SMR recording, which is not suitable for a NAS and will cause a very long sync. You can look up the model number and see if yours are SMR (bad) or CMR (good).
- justsumdadApr 23, 2025Aspirant
All searches show the WD40PURX as CMR
- StephenBApr 23, 2025Guru - Experienced User
justsumdad wrote:
All searches show the WD40PURX as CMR
It is CMR. FWIW, an early RN104 review said it took 32 hours to sync a 4x3TB array. Since the time is linear with storage 4x4TB should take 4/3 * 32 hours or about 43 hours.
So this appears to be slower than usual. Since one cause of a slow sync time is a failing disk, it is worth checking the logs I mentioned to see if anything is going wrong.
- justsumdadApr 23, 2025Aspirant
Google quick search seems to say it takes some time -
Formatting a NAS with RAID 5 on four 4TB drives can take anywhere from 24 to 96 hours, and the exact time depends on various factors, including the NAS hardware and the formatting process.
I take it to access this zip file I would have to access the system root via SSH over putty or something like so...
and no I am not accessing the unit, its just sitting there formatting the volume.
Via GUI there are no errors reported in the logs:
Related Content
NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!