NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Replacement fans for ReadyNAS 2100
One of the fans in my 2100 sometimes will not start after power up, and constantly run at a bit lower RPM than the other fan. The NAS is old so I guess it is about time to replace both fans. Any ...
It is some odd double fan. Three of them. Model seems to be AGE04020B12M, but when I search for that I only find a single fan model, 40x40x20 mm.
Interesting format, two "standard" fans in a duo-configuration, indeed. Challenge customer.support@netgear.com for spares. If Netgear does have no more spare fans available, I would ask Crown Precision & Electronics Co. Ltd. via sales@crownthermal.com.
The wall between them looks almost twice as thick as the outside walls. So is there sufficient slop in the mounting hole locations that you can just glue two 40mm fans together?
- The outside dimensions of the dual pack is 80 mm X 40 mm wide? Then two 40 X 40 mm standard fabs can be installed.
schumaku wrote:
The outside dimensions of the dual pack is 80 mm X 40 mm wide? Then two 40 X 40 mm standard fabs can be installed.I think that's the case. Googling for 2100 fan replacements does bring up several two-fan 40x40x20 mm kits on ebay (and some other sites).
I believe these same fans were used in the ReadyNAS 1100, and that the Netgear part number was 405-10001-01 RN11B-FAN.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
