NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Rn 212 doesn't boot
Hi everyone! Need some help with rn212. It suddenly hanged and I rebooted it. During reboot power button blinks as usual, but a minute later it starts blinking like 2 short 1 long blink. Neither route...
Hi aprosnyak,
Welcome to the Community!
You may try booting up the NAS without the drives inside it (Note: Please label drives with its corresponding bay before you remove it) and see if RAIDar will detect it. The RAIDar should detect it with a status of 'No disks detected'.
If NAS is still not detected by RAIDar, it is highly possible that the issue is with the chassis already.
Regards,
Hi aprosnyak,
Welcome to the Community!
You may try booting up the NAS without the drives inside it (Note: Please label drives with its corresponding bay before you remove it) and see if RAIDar will detect it. The RAIDar should detect it with a status of 'No disks detected'.
If NAS is still not detected by RAIDar, it is highly possible that the issue is with the chassis already.
Regards,
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
