NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RN2100 v2 (X-RAID2) hard disk compability
Hi, thinking of upgrading our RN2100 to 4x4TB, but in the http://kb.netgear.com/app/answers/detail/a_id/20641?utm_source=contactus&utm_medium=website-internal&utm_campaign=contactus_postsales_Ready...
JanniF wrote:
Hi,
Is it possible to use a "WD RED WD40EFRX" instead of a "WD RED WD30EFRX" that's listed in the compability list?
Possible? Yes.
There are some expansion limits with OS 4.2, and if your initial volume size was < 4 TB you might run into them. If you do, you'll need to do a factory reset and rebuild the NAS.
JanniF wrote:
"NETGEAR Technical Support can and will deny support on devices using drives not found on the official compatibility list."
Also true. Unfortunately Netgear neglects the HCL on the legacy NAS models, which often creates a catch-22 for customers. If you need the space, I'd probably install the WD40EFRX and fight with support later if needed.
Thanks for the response.
So in our case we have a setup with 4x2TB and almost 95% is used.
I think I read that there are two limitations in os4.2 (correct me if im wrong)
"One is that a volume growth is limited to 8 TiB over its lifetime. The second is that a volume cannot grow over 16 TiB.
You can create a larger volume size than 16 TiB if you use disks of the same size, and do a factory reset with them all in place. That volume can't be expanded though."
So this means that I can't expand our current setup with 4x4TB disks? And that I have to do a factory reset if I want to use 16TB?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
