Hi All I have been chatting with tech support and they have exchanged my RND2000 V2 and still not getting seen but i have another Rack Unit Netgear ReadyNas and that is working perfectly and ideas?it can be seen on my network just not by RAIDar Any ideas i have tried default password but only one that let me in admin was netgear1 but that takes me to shared folders but there are none because has not been setup? Hair being pulled out as support are no help at all Mike

Mickeyperks wrote: Any ideas i have tried default password but only one that let me in admin was netgear1 but that takes me to shared folders but there are none because has not been setup? You need to use https://nas-ip-address/admin Just using https://nas-ip-address won't work, it will redirect to https://nas-ip-address/shares. Also, most browsers (including Chrome and Edge) have just dropped TLS 1.0 support. That's a problem for this, since the older legacy NAS don't support TLS 1.2. Internet Explorer will work.

This is what i see now StephenB wrote:Mickeyperks wrote: Any ideas i have tried default password but only one that let me in admin was netgear1 but that takes me to shared folders but there are none because has not been setup? You need to use https://nas-ip-address/admin Just using https://nas-ip-address won't work, it will redirect to https://nas-ip-address/shares. Also, most browsers (including Chrome and Edge) have just dropped TLS 1.0 support. That's a problem for this, since the older legacy NAS don't support TLS 1.2. Internet Explorer will work.

FWIW, this is the original Duo (called a v1 here) - not the v2. Can you let us know the browser you are using, and also confirm that you are using https://nas-ip-address/admin? You might need to clear the browser cache. Also, it would be useful to know what status RAIDar is seeing: https://kb.netgear.com/20684/ReadyNAS-Downloads#raidar

Mickeyperks wrote: Its version 2 The part numbers are confusing (v2 in the part number doesn't mean what you think it does). The original Duo (v1) runs 4.1.x firmware uses a Sparc CPU says "ReadyNAS Duo" on the front panel. The Duo v2 runs 5.3.x firmware uses an Arm CPU says "ReadyNAS Duo v2" on the front panel Can you confirm the platform based on this info?

RND200 v2 Not Being seen even after Netgear replaced on RMA

15 Replies

Replies have been turned off for this discussion

StephenB
Guru - Experienced User
Feb 12, 2022
Mickeyperks wrote:

Any ideas i have tried default password but only one that let me in admin was netgear1 but that takes me to shared folders but there are none because has not been setup?

You need to use https://nas-ip-address/admin Just using https://nas-ip-address won't work, it will redirect to https://nas-ip-address/shares.

Also, most browsers (including Chrome and Edge) have just dropped TLS 1.0 support. That's a problem for this, since the older legacy NAS don't support TLS 1.2. Internet Explorer will work.
- Mickeyperks
  Aspirant
  Feb 12, 2022
  This is what i see now
  StephenB wrote:
  Mickeyperks wrote:
  
  Any ideas i have tried default password but only one that let me in admin was netgear1 but that takes me to shared folders but there are none because has not been setup?
  
  You need to use https://nas-ip-address/admin Just using https://nas-ip-address won't work, it will redirect to https://nas-ip-address/shares.
  
  Also, most browsers (including Chrome and Edge) have just dropped TLS 1.0 support. That's a problem for this, since the older legacy NAS don't support TLS 1.2. Internet Explorer will work.
  - StephenB
    Guru - Experienced User
    Feb 12, 2022
    FWIW, this is the original Duo (called a v1 here) - not the v2.
    
    Can you let us know the browser you are using, and also confirm that you are using https://nas-ip-address/admin?
    
    You might need to clear the browser cache.
    
    Also, it would be useful to know what status RAIDar is seeing: https://kb.netgear.com/20684/ReadyNAS-Downloads#raidar

Forum Discussion

RND200 v2 Not Being seen even after Netgear replaced on RMA

15 Replies

Related Content

Readynas Duo RND200 v2, firmware V4.1.6

EAX20 replacement power adapter

RAXE500 power adapter replacement................

Does RAX120 replace XR500

RBS50 REPLACEMENT

NETGEAR Academy

ProSupport for Business