NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RND4000 NV+ and Drive Caddy Screw Information/Help
So I came to acquire a old RND4000 and after learning, coming up to speed and getting it running, which it is now working, only item that I'd like to see if I can get from maybe 3rd party sources is ...
Yes, a packet of screws for SuperMicro caddies work fine. They are just slightly longer, but the drives' holes are deep enough that they fully seat, and they have the proper shallow pitch heads. They are available on Amazon and elsewhere. Just be sure to get the ones for 3.5" drives, as the ones for 2.5" are a different size. But the price has gone up quite a bit. These also work and are a cheaper, but you may have difficulty getting them if you are outside the USA: https://www.amazon.com/gp/product/B01N3ZG8QX.
Ok kewl. Thank you both.
I happend to find a bag of screws from my PC building days and found some screws that will be temporary until I can find the real flat pan head ones. The head on these are not flat so they work in a pinch. Had to move the far right drive screws to the front as the head on these sticks out too much on the side of the inside case wall. Will wait for more exact information. For now the NAS is back upright and drives are Ok.
I'll get these ordered. Thankl you much.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
