NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RND4000 Stuck at 13% when booting
Hi The device is out of warranty. Serial number 23J5197M00AFE So far I have attempted testing drive to see if that gets any results. They all appear to be good. I have reinstalled the OS - still ...
Eventually got to the Factory reset stage.
This worked but disk 2 showed as failed which may have been the problem all along but no other evidence.
Replaced the disk a did another Factory reset and all came back golden. 🙂
Did full Shutdown restart to find that disk 2 reported as dead. 😞
tried a couple of other disks in Slot 2. They also reported dead. Beginning to suspect that Slot 2 is faulty.
Tried another disk and it is now syncing.
I think that slot two may be playing up so will see how it goes with the thought that is has gone past its best and needs replacing.
Filesystem Size Used Avail Use% Mounted on
/dev/hdc1 2.0G 546M 1.5G 28% /
tmpfs 16k 0 16k 0% /USB
/dev/c/c 5.5T 3.7T 1.8T 68% /c
So its not the OS partition being full that is the problem.
A MOD has found that one of the disks has failed so i'm going to try a replacement and see what happens.
Eventually got to the Factory reset stage.
This worked but disk 2 showed as failed which may have been the problem all along but no other evidence.
Replaced the disk a did another Factory reset and all came back golden. 🙂
Did full Shutdown restart to find that disk 2 reported as dead. 😞
tried a couple of other disks in Slot 2. They also reported dead. Beginning to suspect that Slot 2 is faulty.
Tried another disk and it is now syncing.
I think that slot two may be playing up so will see how it goes with the thought that is has gone past its best and needs replacing.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
