NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
tcp_ack+633 reoccuring error
ReadyNAS 314 system ReadyNAS 626 on the same network and has had no errors The 314 has had three of these errors in past 6 months. Had to hard reset with removal of power -- device did respond...
Digital999 wrote:
ReadyNAS 314 system
ReadyNAS 626 on the same network and has had no errors
The 314 has had three of these errors in past 6 months.
Does the RN314 use link aggregation/bonding?
No.
Topology is simple one dimensional LAN with clients, router (DHCP server duties) and AP devices, and about 10 fixed IP devices (ReadyNAS units, cameras, etc.)
Digital999 wrote:
No.
The tcp_ack+633 is a crash in the NAS software. One possible cause is a failing NIC in the NAS (unfortunately not repairable if that is the case).
I suggest swapping cables with the RN626 just to rule that out (though a failed cable is unlikely). Another thing you can try is switching to the other NIC.
It is something to try.
The issue occurs every two to three months so my initial idea is that cables are not the issue.
NIC failure is a possibility -- I will switch NIC interfaces after the rebuild.
Intermittent hardware failures are a PITA -- no way to actually understand/fix until hard failures start to occur. If it does not work I will repost when the next occurrence happens.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
