[super_poussin] request webcam security soft

Hello,

On a ReadyNAS Pro with FW4.2.5 I installed super-poussin's beta addon and now have no access to frontview. Has anyone else encountered this? If so, is there a quick fix or do I need to perform a firmware reinstall?

TIA.

Cheers.

Fishbones wrote:
Hello, On a ReadyNAS Pro with FW4.2.5 I installed super-poussin's beta addon and now have no access to frontview. Has anyone else encountered this? If so, is there a quick fix or do I need to perform a firmware reinstall? TIA. Cheers.

check your pm, you will found the solution

the bin has bin updated to prevent the problem you were facing

@Super_poussin, Will there be a version available for the NV?

Thanks, John

JCB_Digger wrote:
@Super_poussin, Will there be a version available for the NV? Thanks, John

will try if I have time.

I currently preparing myself for a competition : 12 h training per week + my regular job :P

super-poussin wrote:
JCB_Digger wrote: @Super_poussin, Will there be a version available for the NV? Thanks, John will try if I have time. I currently preparing myself for a competition : 12 h training per week + my regular job :P

Thanks :-)

Good luck with your competition.

super-poussin wrote:
Fishbones wrote: Hello, On a ReadyNAS Pro with FW4.2.5 I installed super-poussin's beta addon and now have no access to frontview. Has anyone else encountered this? If so, is there a quick fix or do I need to perform a firmware reinstall? TIA. Cheers. check your pm, you will found the solution the bin has bin updated to prevent the problem you were facing

Yes thank you... Kmotion is now running and frontview is back. Now I need to figure out how to configure "motion" to work with a Foscam IPCam.

Cheers

open one of the config example an change the ip with one of your cam .

you need to know which url to use to get stream

super-poussin wrote:
open one of the config example an change the ip with one of your cam . you need to know which url to use to get stream

I now have motion capturing to /c/webroot/webcam/images/20091030/01/tmp but no live video on Kmotion.
Is Live video in Kmotion already implemented in this beta?

EDIT: I'll answer this myself :? Live video is implemented. I needed to do a "kmotion_reload" for changes in motion.conf to take effect. I'll RFM before asking questions :oops:

I want to expose two IP cameras on my home network through the web share on a Duo so we can monitor the house remotely. Will this add-on allow us to do that?

Since we would use this only when we are out of the house (and not using the Duo for anything else), it doesn't matter if the add-on uses all of the Duo's resources when the cameras are online.

(What a great add-on. Thanks super_poussin for building it.)

The beta add-on is not for the Duo. It's for x86 ReadyNas.

super-poussin wrote:
JCB_Digger wrote: @Super_poussin, Will there be a version available for the NV? Thanks, John will try if I have time. I currently preparing myself for a competition : 12 h training per week + my regular job :P

The NV is a Sparc ReadyNas like the Duo. It's on a different platform to the Pro so requires stuff to be compiled separately.

Add-on idea sounds great. Would be interested once it's stable.

Would be cool to be able to setup a few cameras at home so if someone comes into the ReadyNas room at home...