NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
6.6.0 UPS alerts not sent
Had a power supply failure prior to the daily boot up at 08:00. Looking at the logs it appears that a controlled shutdown took place about 2 minutes after the initial startup. The UPS powers other ...
Btw ReadyNAS OS 6.6.1 is now available!
In the unlikely event you still have problems on 6.6.1 please start a new thread.
Except it doesn't ewok.
The data is stale which means the communication with the ups is affected.
The data is stale which means the communication with the ups is affected.
ShoGinn wrote:
Except it doesn't ewok.
The data is stale which means the communication with the ups is affected.Thank you. This was my thought too; though I haven't yet tested mine to failure (UPS battery depletion), when I unplugged the UPS from the wall, the ReadyNAS made no indication at all of any power issue, which it has done on the prior firmware. It certainly appears that the ReadyNAS simply has no communication with the UPS and therefore wouldn't shut itself down safely at any point.
I'll give it a shot later on and let the UPS run down fully to find out for sure. My data is backed up anyway.
You're right. I took a closer look and saw that UPS health updates are tied to the event mechanism. We'll have a fix available in 6.6.1, possibly sooner.
I'm having the same problem myself. I just replaced the battery like 3 months ago. It's a APC 500 Pro I belieave. It's been Yellow for a while. I've been thinking something was wrong with the UPS again. I just went into the settings for it, clicked on Apply and it changed to Green. It's been yellow for a while now. So, clearly a bug.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
