Backup Failure - preserving times invalid argument

No idea? :(

It looks like the destination side is being accessed without admin access. Are you putting an admin login and password in the backup job?

Hi,

I've created an account for the backup, with read/write accesses.

An other information : files are copied on destination side.

Best regards,

Did creating an account for the backup solve the issue?

I have found this is an issue with the permissions within the dlink NAS units.

was this ever resolved? I am having the same problem trying to backup my readynas ultra to a DNS-323...


Job: 001
Protocol: cifs
Source: [Maz]/
Destination: //192.168.1.69/Volume_1/backup


`./euros f1 set.dxf' -> `/job_001//backup/euros f1 set.dxf'
`./euros f1 set.dwl' -> `/job_001//backup/euros f1 set.dwl'
`./Stand-Golf-Bag-KL102-.jpg' -> `/job_001//backup/Stand-Golf-Bag-KL102-.jpg'
`./euros f1 set.dwl2' -> `/job_001//backup/euros f1 set.dwl2'
cp: preserving times for `/job_001//backup/.': Invalid argument


Backup failed. Fri May 18 07:41:54 GMT 2012.

Reason for failure:
Error encountered copying data from source path /Maz/ ==> //192.168.1.69/Volume_1/backup due to unknown reason. Please see log.


The part that is most bizarre is that it DOES copy all the necessary files to the d-link, and they all appear to be working fine... so its not a permissions issue I guess

any ideas?

That is exactly the same problem I was having and got no response for a resolution. In the end I just lived with it for a bit before upgrading the DNS-323 to another readynas!

I am getting the same error

I am backing up some media files from my ReadyNAS Pro to my media player hard drive (PlayonHD) via my network. All the files have copied over ok, but get the" preserving times... Invalid argument" error message and the backup job has a status of "failed". I'm assuming that because the job has failed it will try and do a full backup if I run it again?

It took nearly 4 days to run the job for 1.5TB of data so I don't want to run the full job each time, I want it to do an incremental backup. So unless this problems is resolved, this is just not going to work.

Any staff able to help?

BTW I run another job to a USB HD plugged directly into the ReadyNAS and no errors are reported.

Hi. I've got the same problem. However, the backup works just fine. I mean the files are copied, so I think I'm just going to live with it.
Pierre

I am getting the same error while backing up from ReadyNAS 2100 to DLink DNS-323. However it appears that the files are successfully copied to the destination. So I will live with it for now but I have requested Netgear support for the investigation of the error message.