NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Backup to USB disk fails
I have a ReadyNAS Pro Business edition RNDP6350. Once a week I attach an external USB hard drive to the front USB port and backup the entire C partition. This has worked without issue for a couple of ...
Yes, it has a issue for backup to USB on 4.2.21 and 4.2.22, we found root cause , cp process cause out of memory when doing backup to USB, it will fixed 4.2.23,
you may use resync to backup now, it does not use cp process.
1, Enable Rsync in Servers/Standart Files Protocals
2, Open share list, enable Read/Write in Rsync of USB Share.
3, Add a backup job, set source as remote rsync, input your NAS's IP in Host and Path is USB folder name.
4, Set destination as a share folder.
There was discussion before, please see the below link,
viewtopic.php?f=31&t=65643
you may use resync to backup now, it does not use cp process.
1, Enable Rsync in Servers/Standart Files Protocals
2, Open share list, enable Read/Write in Rsync of USB Share.
3, Add a backup job, set source as remote rsync, input your NAS's IP in Host and Path is USB folder name.
4, Set destination as a share folder.
There was discussion before, please see the below link,
viewtopic.php?f=31&t=65643
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
