NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Bonding multiple NIC's w/ Cisco 3750
I have a new ReadyNAS 4220. I'm trying to bond all 4 1GbE NIC ports to a Cisco 3750G switch. I'm connecting to the management tool via the 10GbE port so the tool connectivity isn't affected by my tw...
Version is 6.1.8
If groupstate is the channel-group or etherswitch group, then it is showing in the Cisco configuration as "Static Access" for both "Administrative Mode" and "Operational Mode" for VLAN 124 just like all the other ports.
I hadn't opened a ticket yet. I will in the morning.
I rewound and cleared all LACP, port groups and bonding from both the switch and the ReadyNAS. I rebooted both (actually powering them both off).
I then brought the switch back up, and configured "EtherSwitch.." group 1 by adding port 3 - 6 in LACP mode.
I then brought ReadyNAS back up, and configured the 4 interfaces individually with their own IP's and was able to ping all 4.
I then created a new Bond1 group and added them in. The progress spinner has not gone away in 20 minutes after committing. However, if I open another browser window and go to networking, the Bond1 group shows up with all 4 NIC's in it. But I still can't ping the interface IP.
I sent the logs I have, Thanks.
If groupstate is the channel-group or etherswitch group, then it is showing in the Cisco configuration as "Static Access" for both "Administrative Mode" and "Operational Mode" for VLAN 124 just like all the other ports.
I hadn't opened a ticket yet. I will in the morning.
I rewound and cleared all LACP, port groups and bonding from both the switch and the ReadyNAS. I rebooted both (actually powering them both off).
I then brought the switch back up, and configured "EtherSwitch.." group 1 by adding port 3 - 6 in LACP mode.
I then brought ReadyNAS back up, and configured the 4 interfaces individually with their own IP's and was able to ping all 4.
I then created a new Bond1 group and added them in. The progress spinner has not gone away in 20 minutes after committing. However, if I open another browser window and go to networking, the Bond1 group shows up with all 4 NIC's in it. But I still can't ping the interface IP.
I sent the logs I have, Thanks.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
