NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Connecting a 2 bay use caddy to one use port on a RN 104 is this possible
Hi pretty new to this I am running a ready nas 104 with the latest software 4.wd red 2tb drives I Have a couple of western digital green drives and a 2 bay Orico drive caddy not in any raid format ...
I believe you are asking about using a multi-drive USB enclosure with your ReadyNAS and that, further, you are using it in a JBOD rather than a spanned or RAID configuration (so you see each drive in the enclosure separately). The word "caddy" is confusing some, as that's simply a mounting device, as is used to hold the drives in your NAS.
I know that with the older model ReadyNAS devices, it was sort of hit-or-miss whether one of these would work or not. Some brands did, others not.
Hello omygitworks,
Welcome to the community!
First of all, please make sure to use disks that are listed at HCL.
ReadyNAS is using a BTRFS format, so have a full of the files that you have stored to these disks that you want to insert to the ReadyNAS. The disks should be empty and no partition. From there you can start from scratch, factory resetting the NAS with the disks inserted will force the NAS to format the disks to the file system it is using and will allow you to create a new volume and configure RAID.
Regards,
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
