NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Corrupt root and can't access backup or media folders
A few weeks ago, I noticed my duo was inaccessible and had the slow blue blinking light. I restarted the nas and it was getting an IP from the router, but could not be accessed through frontview nor ...
Thanks for your response, StephenB.
Not sure what the program is pulling but it labeled 3 folders I restored to an external drive NTFS and FAT. I haven't overwritten anything on the NAS drive. I put the primary drive back in and left the second one out.
RAIDar show a yellow light (Warning or dead) on the far left, yellow for what I assume is the RAID column, 1 green and yellow for the drives column, fan is green, info = 4.1.13. Mapping via UNC (IP or DNS), if I click on either Backup or Media folders (my 2 root folders), I get "Windows cannot access \\NAS\backup....The network path was not found."
When I pulled up Frontview, I get a pop up message that says "Error_Invalid_Security_Mode". Trying to enable HTTP on the shares I get "The paths for the shares listed below could not be found. Typically, this occurs when the ReadyNAS is unable to access the data volume. media backup"
I tried to create a new share called "test' and it gave the error, "No filesystem available for share. [test]"
If there is any other info or test that would be helpful in resolving this, please let me know! Thanks for your help!
Not sure what the program is pulling but it labeled 3 folders I restored to an external drive NTFS and FAT. I haven't overwritten anything on the NAS drive. I put the primary drive back in and left the second one out.
RAIDar show a yellow light (Warning or dead) on the far left, yellow for what I assume is the RAID column, 1 green and yellow for the drives column, fan is green, info = 4.1.13. Mapping via UNC (IP or DNS), if I click on either Backup or Media folders (my 2 root folders), I get "Windows cannot access \\NAS\backup....The network path was not found."
When I pulled up Frontview, I get a pop up message that says "Error_Invalid_Security_Mode". Trying to enable HTTP on the shares I get "The paths for the shares listed below could not be found. Typically, this occurs when the ReadyNAS is unable to access the data volume. media backup"
I tried to create a new share called "test' and it gave the error, "No filesystem available for share. [test]"
If there is any other info or test that would be helpful in resolving this, please let me know! Thanks for your help!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
